Energy Efficient Home Credit IRC

Energy Efficient Home Credit IRC Sec. 45L

and List of Eligible Software Programs for Certification

For a homebuilder to qualify for the New Energy Efficient Home Credit under IRC Sec. 45L, they must receive a certification that the dwelling unit has met the energy savings requirements of Sec. 45L.

  • An eligible certifier must use an approved Software Program to calculate the dwelling unit’s energy consumption for purposes of Sec. 45L.
  • Sec. 45L provides a $2,000 credit for a traditional free-standing home and either a $1,000 or $2,000 credit for a manufactured home depending on the level of energy savings achieved.
    Note: These provisions, originally set to expire 12/31/2007, have been extended through 12/31/2008 as set forth in the Tax Relief & Health Care Act of 2006.

IRS Notice 2006-27 (Section 5) and Notice 2006-28 (Section 6) provide for the Service to create and maintain a list of software programs that have been accepted by the Service for use in computing energy consumption for the purpose of certifications under Sec. 45L.

Eligible Software Programs

  • EnergyGauge® USA version 2.5EnergyGauge® USA version 2.6
    Florida Solar Energy Center
    Tei Kucharski
    EnergyGauge
  • REM/Rate v.12.2REM/Rate v.12.3REM/Rate v.12.4REM/Rate v.12.5
    Architectural Energy Corporation
    David Roberts, P.E.
    Architectural Energy Corporation
  • MICROPAS7 v7.1MICROPAS7 v7.3MICROPAS7 v7.4
    Enercomp, Inc.
    Ken Nittler and Robert Scott
    MICROPAS
  • Builder Energy Solutions Calculator
    Owens Corning
    Dwight Shuler
    Owens Corning
  • EnergyPro v4.4
    Energy Soft
    Martyn Dodd
    Energy Soft

The Rest @ the Internal Revenue Service (IRS)

Comments

Post a Comment

Popular posts from this blog

CFC Solutions GMBH now MTU Onsite Energy GmbH

MTU Onsite Energy GmbH is a subsidiary business unit of MTU Friedrichshafen , a subsidiary of Tognu m AG , involved in manufacturing large diesel engines and complete propulsion systems. (thanks for the Update Bryan-see comments below) CFC Solutions became MTU Onsite Energy GmbH (Fuel Cell Systems Division) in September 2008. The company manufactures diesel engines for propulsion systems in ships, distributed power plants, heavy vehicles and rail in the power range between 35 and 9,000 kW. Since 1990, MTU has shown interest in fuel cells which resulted in the foundation of MTU CFC Solutions, now CFC Solutions. The company has been involved in the development and manufacture for molten carbonate fuel cells ("HotModule", 250kW). Since the end of 2000, MTU is also involved in PEM technology in order to develop fuel cell drive systems for off-highway applications. The focus of this work has been on propulsion systems for ships and on-board power generation. The aim is to develop...
Read more

Loans to Small Bunsinesses Opening Up

In mid-October, President Obama moved to raise the amount of credit extended to small businesses. If Congress approves his plan, the measures would enable community banks to borrow at low rates from the Treasury Department's Troubled Asset Relief Program (TARP). It would also raise loan caps on some Small Business Administration (SBA) programs. To qualify, the banks would have to show how they would increase lending to small enterprises. The relief could not come a moment too soon. The job-creation engine known as small business has been slammed, not only because of falling demand but also because the normal flow of financing has slowed to a trickle. Small enterprises have created two-thirds of all new jobs since 1994 and they employ more than half of all private-sector employees. (The SBA's definition of a small enterprise is "an independent business having fewer than 500 employees.") In September, for the second straight month, they laid off more workers th...
Read more

Clean Energy Roadmap Workshop in Austin 18-19 November

CHP Industry and Interested Stakeholders: At the upcoming Clean Energy Roadmap Workshop, the GC RAC seeks input from the CHP, waste heat recovery, and district energy industries and key stakeholders regarding market development strategies and RAC service offerings in Texas, Louisiana, and Oklahoma. A vital part of the workshop preparation is a survey of the CHP industry and interested stakeholders. Your input is needed now to help develop a successful workshop. Whether or not you plan to attend, please TAKE THE CH P SURVEY NOW Please forward the survey link to anyone you know that might have an interest in taking part. http://www.surveymonkey.com/s.aspx?sm=P59WnTuFDAM1jHWu3JZn1A_3d_3d If you are interested in attending the Workshop, come prepared to roll up your sleeves and share your ideas to help grow the CHP market in the Gulf Coast region. This event will be a major opportunity for interested stakeholders to provide strategic input to the GC RAC regarding its education and...
Read more